Wiki > Murmur

Murmur is the server application for the Mumble voice chat client.

Installation

1. Download the Murmur static binary.

    wget https://github.com/mumble-voip/mumble/releases/download/1.2.19/murmur-static_x86-1.2.19.tar.bz2
   

2. Extract Murmur.

    mkdir -p ~/murmur && tar xvjf murmur-static*.tar.bz2 --strip-components=1 -C ~/murmur
   

3. (Optional) Clean up install archive.

    rm murmur-static*.tar.bz2
   

Configuration

1. Copy the murmur default configuration file to ~/.murmurd

    mkdir -p ~/.murmurd; cp ~/murmur/murmur.ini ~/.murmurd/murmur.ini
   

2. Open murmur.ini for editing.

    nano ~/.murmurd/murmur.ini
   

3. Configure murmur. Read the comments in murmur.ini or see here and here for more information.

   1. The following options need to be changed/set:

       - port=20132 (20132 has been automatically generated for you, but you may use another 5 digit port between 10000 and 32767.)
      

   2. The following options may be changed/set at your discretion:

       - bandwidth=130000 (The maximum suggested for Mumble)
       - welcometext= (The text that shows when someone connects to your server)
       - serverpassword= (Leaving this blank will allow anyone to connect without a password)
       - users=
       - registerName= (Will change the name of the top channel from the default 'Root')
       - certrequired= (Set to true to only allow clients with a certificate to connect)
      

   3. The rest is entirely optional. See the links above for more information. Hit Ctrl-X, then Y, followed by Enter to exit and save your changes.

4. Start murmur.

    ~/murmur/murmur.x86
   

5. (Optional) Set a SuperUser (Admin) password. If you need to administrate your server through Mumble, this needs to be set.

    ~/murmur/murmur.x86 -supw <YourPasswordHere>
   

6. Set your Mumble client to connect to server.whatbox.ca with the port and password you set in murmur.ini.